Ericsson iPECS-100 - Multiple Voice Mailbox Support

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
136
2.56 MULTIPLE VOICE MAILBOX SUPPORT
Description
A station can access any Voice Mailbox by dialing the VM group, the mailbox number and
password. iPECS Phone users may assign one or more Flex buttons to access a specific
mailbox and receive a visual indication (LED flashes) of message status in the mailbox. A Flex
{VMAILBOX} button is assigned to allow access to multiple Voice Mailboxes.
Operation
iPECS Phone
To assign a {VMAILBOX} Flex button;
1. [PGM] + {FLEX} + VM group + Mail-box (station) number + [SAVE]
To access a Voice Mailbox using the {VMAILBOX} Flex button;
2. Lift the handset or press the [SPEAKER].
3. Press the {VMAILBOX} Flex button.
4. Dial the Mailbox password.
Conditions
1. A Flex button can be assigned to access the Mailbox for a Station Group or CO/IP
Line Voice Mailbox.
2. The {VMAILBOX} button LED will flash indicating new messages have been
received in the associated mailbox.
3. The Flex button cannot be assigned to access the mailbox of a networked station.
4. An adjunct Voice Mail may not provide proper notification to the system of message
status and thus, the {VMAILBOX} button LED may not properly indicate new
messages.
Programming
Related Features
 External Auto Attendant/Voice Mail
 VMIM/VSF Voice Mail
Hardware
 iPECS Phone
 External or VMIM/VSF Voice Mail