iPECS-LIK
Feature Description & Operation Manual
3.12
BARGE IN
Description
Barge in permits an authorized extension to intrude into other existing outside/internal calls.
Between intruding extension and parties on initial calls a conference call is established. There
are Two Barging In operations.
–
Monitor : The intruding extension can listen to the existing conversation.
–
Speech : The intruding extension can join to the existing conversation.
In PGM 113 – Barge In mode, Barge In supervisor mode can be set.
If 0, Barge In is disabled.
If 1, Barge In is possible only monitor other’s conversation.
If 2, Barge In is possible monitor other’s conversation, join it, and forced disconnected it.
Operation
Monitor:
1. Call to the busy station and user hears the busy tone.
2. Press the “MONITOR” button on 3 soft buttons. (Use Navi > Key to Display)
3. Caller can listen to the existing conversation. The others hears “Warning Tone”
Speech & Drop:
1. During caller listen to the existing conversation, press the “JOIN” button on 3 soft
buttons.
2. Caller can join the conversation. The others hear “Intrusion Tone”.
3. Supervisor can cancel the conversation with “DROP” button on 3 soft buttons.
4. Supervisor can exit from barge-in by hang up the phone.
Conditions
1. This feature is only supported for digital phone with 3 soft buttons.
2. This feature is only available for called party is talk state (with CO Line or Station).
3. Barge-In supervisor can see the other party of called station before monitor
operation.
4. Barge-In to SIP extension is allowed only when MCIM is installed.
Programming
PGM 113 – Barge In Mode.
Related Features
Intrusion
Hardware
To Next Page
Loading...