Ericsson iPECS-100 - 5.4 AUTOMATIC SPEAKER SELECT

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
274
3.11 PUSH-TO-TALK PAGING
Description
Each iPECS Phone can be assigned as a member of one or more of the system’s nine Push-
To-Talk page groups. The iPECS Phone user may login or log-out of any one or all PTT groups
to which it is assigned. Once logged in, the user may place or receive one-way page
announcements to/from other users who are logged in to the same PTT group. To place a PTT
page announcement, the user must press and hold the {PTT} Flex button.
An Attendant may log other stations in and out of PTT groups.
Operation
iPECS Phone
To assign a {PTT} Flex button;
1. [PGM] + {FLEX} + [PGM] + “99” + [SAVE]
To log-in to a PTT group;
1. Dial “#0”, the PTT Log-in/out code.
2. Dial the desired PTT group number (“1”~“9” and “0” for all groups).
To log-out of the PTT group(s);
1. Dial “#0”, the PTT Log-in/out code.
2. Dial “*”.
To place a page to the active PTT group;
1. Press and hold the {PTT} Flex button.
2. After confirmation tone, make page announcement.
Attendant
To log other stations in to a PTT group;
1. Press the [PGM] button.
2. Dial “077”, the Attendant PTT log-in/out code.
3. Dial the desired station range.
4. Dial the PTT group number (“1”~“9” and “0” for all groups).
5. Press the [SAVE] button.
To log other stations out of a PTT group;
1. Press the [PGM] button.
2. Dial “077”, the Attendant PTT log-in/out code.
3. Dial the desired station range.
4. Dial “*”.
5. Press the [SAVE] button.