iPECS-LIK
Feature Description & Operation Manual
8.
SIP EXTENSION
8.1 REGISTRATION
Description
iPECS-LIK supports standard protocol equipped SIP Phone including series of Ericsson-LG
Enterprise SIP Phone Extension.
Operation
SIP Phone Self Programming
Network Configuration
1. IP mode : Static(Fixed) / DHCP
2. Subnet Mask
3. Default gateway IP address
4. IP address
5. DNS IP address
6. Profiling (for Wireless)
SIP Server Configuration
1. Proxy IP address : MFIM IP address
2. Proxy IP port : 5060
3. Domain : MFIM IP address
4. Registration : ON
5. Registration Timer : 30 ~ 3600 second (more than 10 minute recommended)
6. Local UDP/TCP/TLS port : 5060 or other value
7. Signaling/Transport Mode : UDP (or TCP or TLS)
Line(User) Configuration
1. SIP Account :
–
Display Name (Optional) : Station Name (this will be applied to MFIM – Station
Name).
–
User Name (Mandatory) : Station Number (this should be same as MFIM –
Device Login / Station User Login (443) / “Desired Number”)
–
Authorization Name (Mandatory) : Login ID (this should be same as MFIM –
Device Login / Station User Login (443) / “ID”)
–
Authorization Password (Optional) : Login Password Login ID (this should be
same as MFIM – Device Login / Station User Login (443) / “Password”)
Call Preferences
1. Call Wait : ON / OFF (When on BUSY, accept other call setup or not)
2. Call Forward
3. DTMF Type (Mandatory) : one of INFO type (After registration to system, SIP Data /
SIP Phone Attributes(211) / “DTMF Type” – set the same type as SIP Phone) c.f)
only support INFO type
To Next Page
Loading...