iPECS-LIK
Feature Description & Operation Manual
3.8
INTERCOM TRANSFER
Description
Users can transfer an active Intercom call to other stations in the iPECS system. Intercom calls
can be transferred after announcing the call (screened) or without announcing the call
(unscreened).
The Intercom station is placed on Exclusive Hold. The Transfer Recall Timer is initiated and, if
this timer expires before the Intercom call is answered, the call will recall the transferring station
until answered or abandoned.
Operation
iPECS Phone
To perform an Screened ICM transfer, while on an ICM call
1. Press [TRANS] button.
2. Dial the station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
Or,
1. Press {DSS/BLF} button for the desired station.
2. At answer or Splash tone, announce call.
3. Hang-up, return to idle.
While on a Intercom call, Unscreened call transfer
1. Press [TRANS] button.
2. Dial Station to receive call.
3. Hang-up, return to idle.
Or,
1. Press {DSS/BLF} button for the desired station.
2. Hang-up, return to idle.
SLT
To perform a Screened transfer of an active Intercom call
1. Momentarily depress the Hook-switch.
2. Dial Station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
While on an Intercom call, Unscreened call transfer
1. Momentarily depress the Hook-switch.
2. Dial Station to receive call.
3. Hang-up, return to idle.
To Next Page
Loading...