iPECS-LIK
Feature Description & Operation Manual
5.4
AUTOMATIC SPEAKER SELECT
Description
iPECS Phones programmed for Auto Speaker Select can access a CO/IP line or an internal
call by pressing the appropriate button without the need to lift the handset or press the
[SPEAKER] button. Audio from the CO/IP line or called station is sent to the speaker as if the
user pressed the [SPEAKER] button and the speakerphone's MIC is activate.
Operation
iPECS Phone
To access an internal or external system resource;
1. Press an assigned {FLEX} button.
Conditions
1. For iPECS Phones not equipped/assigned with speakerphone, the user must lift the
handset to be heard.
2. Paging while on the speakerphone will cause feedback from the paging equipment.
If Auto Speaker is enabled and a {PAGE ZONE} button is pressed, the display will
show "LIFT THE HANDSET". To complete the page, the user must lift the handset
within the predefined 5-second period or return to idle.
Programming
STATION 1 Auto Speaker Select (PGM 111-Btn 1)
Related Features
Hardware
iPECS Phone
To Next Page
Loading...