iPECS-LIK
Feature Description & Operation Manual
5.14
CALL PROFILE
Description
This function provides many flexibility of call re-routing.
If user is not in office, user is in another place, user can get the call by pre-programmed call
profile table. Each station has its 3 call profile tables (table 1 ~ table 3), and each profile table
can have up to 10 destinations.
In Station Program menu ([PGM] + [2] + [6] : CALL PROFILE), user can set or disable Call
Profile Table. User can choose one Call Profile Table of three tables by this menu. If one Call
Profile is selected, incoming call can routed by this Call Profile table.
In Station Program menu ([PGM] + [2] + [4] : ICR SCENARIO), user can configure Call Profile
destinations scenario. Each destination scenario composed of Destination, Scenario Priority,
Call profile table index(0:Deact 1-3:Call Profile table) and Call profile timer.
Operation
iPECS Phone
To create a Call Profile Scenario: (bold text step is necessary)
1. Press the [PGM] button.
2 Dial 24, the ICR menu or log on to the Station Web portal.
3 Select the desired Scenario number (0 - 9).
4 Select the type of Caller ID (0 – 5):
Type 0 – Station CID
Type 1 - All Station
Type 2 – CO CID
Type 3 - All CO call
Type 4 - All call
Type 5 - N/A
5 Enter the Scenario Start and End Date (YYMMDD).
6 Select day-of-week using Flex button:
Flex button 1 (MON) – Flex button 7 (SUN)
Flex 8 button (Holiday)
7 Enter scenario Start Time and End time (HHMM).
8 Select Type of destination (0 – 6):
Type 0 – Station
Type 1 - Hunt group
Type 2 - CO Line Number
Type 3 - CO Group number
Type 4 - CO Loop
Type 5 - CO Transit
Type 6 - N/A
9 Select Scenario Priority (0 to 9) (0:highest priority).
10 Select Forward From Net (0 / 1).
To Next Page
Loading...