iPECS-LIK
Feature Description & Operation Manual
DND/FWD Cancel
Alarm Reset
Group Call Pick-Up
Universal Night Answer
Account Code With Bin
Walking COS
Call Park Locations
Station Group Pilot Number
Station User VSF Features Access
Call Coverage Ring
Direct Call Pick-Up
Access CO Group
Access Individual CO/IP
Access Held Individual CO/IP
Access CO In First CO Group
Attendant Call
Door Open
ENTER INTO CONF-ROOM
ENTER INTO CONF-GROUP
STATION ICR
PICKUP GROUP PICK-UP
EMERGENCY PAGE
Conditions
1. If you can utilize SIP Phone’s programmable Dial Digit Map, you can make
immediate sending out dials w/o press [SEND] or “#” key.
<Refer to below>
–
Digit Map (for Call Setup in SIP Phone)
: you can program Digit Map according to System Numbering Plan
Example) in case of “LIP8002/88xx” SIP Phone type
x.T|0|xx#|xxx#|1xxx|2xxx|3xxx|xxxx+#
Explanation)
“9”: dial “9” for attendant call, you can specify other single digit if you want it to
be sent immediately when press the digit without ending by “#”
‘1xxx’, ‘2xxx’, ‘3xxx’ : extension numbering, you can specify other 2 or 3 or 4 or
more digits starting with a specific prefix digit or digits
‘xx#’, ‘xxx#’, ‘xxxx#’ : dial the other 2, 3 or 4 digits and press “#” to send
‘xxxx + #’ : dial the other more than 4 digits and press “#” to send
–
Digit Map (for 2nd Dial Tone) : Play self dial tone by SIP Phone
Example) in case of „LIP8002/88xx? SIP Phone type
0 : // “0” is CO access code in the first CO group
Programming
Related Features
Hardware
To Next Page
Loading...