iPECS-LIK
Feature Description & Operation Manual
6.11
DSS CONSOLES
Description
The system allows an unlimited number of DSS/LS Consoles to be installed in the system. Up
to 3 DSS/DLS consoles may be associated with a station connected to an iPECS-50 or 100
and up to 9 may be associated with a station for all other system configurations. Each button on
the console can be assigned as CO/IP line, DSS, or feature button.
For ease of programming, each console is assigned to a button “map” in the system database.
The user or Administrator may then change individual Flex buttons as desired. Operation of the
DSS/BLF Console Flex buttons is the same as Flex buttons on the iPECS Phone.
Operation
Conditions
1. Each DSS/DLS Console is assigned to operate in connection with a specific station.
2. There is no limit to the number of DSS/DLS units in a system beyond the basic
system capacities.
3. Assignments for the DSS/DLS button maps are detailed in the iPECS Admin &
Programming manual. Note that the individual button assignments can be changed
as with the iPECS Phone Flex buttons.
Table 6.11-1 Na
To Next Page
Loading...