iPECS-LIK
Feature Description & Operation Manual
4.2
CO LINE FLASH
Description
Analog CO lines recognize a brief open or ground connection, “Flash”, as a request for new dial
tone. When used behind a PBX, a Flash is often used to activate a PBX feature or call transfer.
Operation
iPECS Phone
While connected to an analog CO line
1. Press the [FLASH] button, the system generates a flash on the CO line.
SLT
While connected to an analog CO line
1. Momentarily depress the Hook-switch.
2. Dial “551”, the Flash feature code.
Conditions
1. Stations may Flash on a CO Line defined for PABX operation and will experience
COS dialing restrictions if a PABX Trunk access code is dialed.
2. During a Flash, the LED for the CO line button will remain lit.
3. A Flash may be stored as a part of a Station or System Speed Dial number.
4. While connected to an internal call or dial tone, pressing the [FLASH] button will
regain ICM dial tone.
5. While making a Page Announcement (internal or external, including all call paging),
pressing the [FLASH] button will terminate the Page Announcement and return
ICM dial tone.
6. The Flash function is not available on VoIP calls.
Programming
CO/IP 1 Flash Type (PGM 141-Btn 6)
2 CO Flash Timer (PGM 142-Btn 12)
Related Features
Station Speed Dial
System Speed Dial
Hardware
To Next Page
Loading...