EasyManua.ls Logo

Ericsson iPECS-100 - 2.58 NETWORK MANAGEMENT SYSTEM

Ericsson iPECS-100
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
118
2.43
HOT DESK
Description
iPECS Phones can be assigned as Hot Desk phones allowing users (Agents) to login with the
iPECS. The Hot Desk will become active and will take on the attributes defined for the Agents
station number. When the Agent logs off, the Hot Desk phone becomes inactive and the
Agents calls are forward to the user-entered destination. A different Agent may then login
through the inactive Hot Desk phone.
Operation
iPECS Phone
To login through an inactive Hot Desk;
1. Lift the handset or press the [SPEAKER] button,
2. Dial “*0,
3. Dial the users station number and authorization code, Agent is logged in.
To logout through the active Hot Desk;
1. Press the [PGM] button,
2. Dial * * or press the {AGENT LOGOUT} Flex button,
3. Use the [VOL UP]/[VOL DOWN] buttons to select call forward destination for Agent
calls (speed dial, joined mobile phone, VMIM/VSF, or VM group).
4. Press the [SAVE] button.
Conditions
1. The Hot Desk phone can be programmed to log-out an active user automatically if
no action has been taken by the Agent for the Auto Log-out timer.
2. An active (logged in) Agent can login to another inactive Hot Desk. However, this
will log the Agent off the previously active Hot Desk.
3. A user may only logout from the Agents active Hot Desk phone. Attempting to
logout using a different Hot Desk phone will return error tone.
4. The Flex button map of the Hot Desk station is fixed and does not take on the
configuration associated with the Agents station.
5. When logged off, the Agents active database, including the following items, are
saved.
Station Number
Station Attributes, PGM 111~124
CO Routing, Ring assignments, DID routing, etc.
Voice Mail
Station Group assignment
6. The number of Hot Desk phones and Hot Desk users is limited to the system
capacity. Each Hot Desk phone and Hot Desk user (Agent) requires a separate
station channel in the system.
7. To identify the station number, only station authorization codes may be used for Hot
Desk login.

Table of Contents