iPECS-LIK
Feature Description & Operation Manual
5.17
OFF-HOOK SIGNALING
Description
When a station, which is off-hook, receives a call or a CO/IP call rings into the system for the
off-hook station, the station will receive the assigned Off-hook ring signal or, for ICM calls, a
Camp-On, Voice-Over Announcement or Off-hook ring signal may be received.
The Off-hook ring Signal may be either a muted normal ring signal or a single tone burst based
on the system assignment. This signal is delivered to the iPECS Phone speaker.
Operation
System
Operation of Off-hook ring signals is automatically controlled.
Conditions
1. While using the speakerphone, a Camp-On tone is provided over the speaker in
place of the assigned Off-hook ring Signal.
2. Activating the DND or One-Time DND places the station in DND, terminating any
Off-hook signaling.
3. Off-hook ring signals terminate when the call is answered, forwarded, or
abandoned.
4. A station, which is receiving Off-hook ring signals, will receive normal ring upon
return to idle status.
Programming
CO/IP 1 CO Line Ring Assignment (PGM 144)
SYSTEM 1 Off-Hook Ring Signal Type (PGM 161-Btn 1)
Related Features
Call Waiting/Camp-On
CO/IP Ring Assignment
DND (Do Not Disturb)
DND - One Time DND
Hardware
iPECS Phone
To Next Page
Loading...