Ericsson iPECS-100 - 5.8 DID CALL WAIT

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
279
4.3 CO/IP LINE GROUPS
Description
The CO/IP lines in the system can be placed together into groups for assigning access by
stations and common access dial codes. There are 20 groups in the iPECS-50 & 100, 72
groups available in the iPECS 300 & 600 and 200 groups available in the iPECS 1200.
Unused CO lines are assigned to CO/IP Group 21 in the iPECS-50 & 100 , 73 in the iPECS
300 & 600 and 201 in the iPECS 1200. Private Lines are assigned to CO/IP Group 00.
Operation
Conditions
1. Unused CO/IP lines should be assigned to the appropriate group so that stations
cannot access these lines.
2. CO/IP lines in Groups 01 through 72(200) can be accessed individually by dialing
the code “88” and the CO/IP line number.
3. Only {CO}/{IP} line buttons can access the CO/IP lines assigned to group 00,
Private Lines.
4. The system will select a CO/IP line from a group based on the Round Robin or Last
Choice determined by database assignments.
Programming
STATION
1
CO PGM (PGM 112-Btn 6)
CO/IP
1
CO Line Group (PGM 141-Btn 1)
SYSTEM
1
CO Line Choice (PGM 160-Btn 4)
Related Features
Hardware