Updates for iPECS release 4 software and LG-Nortel logo
General edits through-out.
Changed formatting (header, footer, etc.) for unified iPECS Manual
appearance.
CLI based Call Routing for DID, added reference to DID Lines in ICLID
routing.
Flexible configuration for up to 600 ports, covered in section 1.2.
Hunt Group Mailbox, referenced mailbox assignments in Station Hunt
Groups.
Multiparty voice conferencing (Up to 24 Parties in total), added to Multi-Party
Conference.
Conference Room Added Conference Room.
Simplified Message retrieval added to Message Wait/Call Back and
restructured.
Muted Ring w/Pre-Selected Msg added & restructured Pre & Custom Display
Messages.
T.38 Fax Relay, added IP FAX, T.38.
Day/Night Mode applied between groups, added reference and rewrote ICM
Tenancy.
ACD sections previously section 2.5 to 2.20, restructured ACD sections now
section 2.5.1~2.5.12.
Multi-level Admin access, restructured admin with Multi-level section.
Programmable Admin TCP port, restructured Web Admin & added
programmable tcp port.
Web User manual, multi-lingual, added Web User Manual section with Multi-
lingual support.
Network Security & Priority added new section with VLAN, Diffserv, IPSec
and SRTP.
Transparent Networking added Centralized Networking with Fail-over &
Remote Gateways.
Hunt Group Station Forward, added condition for Hunt group recognition of
forward state.
System Processor Redundancy, added section for standby MFIM600.
Call Recording, added unconditional Call recording feature.
IP Trunking, added SIP and H.323 with GK routed call
VSF section revised to VMIM/VSF, added VMIM description.
VMIM e-mail notification added
VMIM Back-up station added
VMIM multi-language support
MOH, added VMIM/VSF MOH
Authorization codes, added new operation for system codes, “* + table index
To Next Page
Loading...