iPECS-LIK
Feature Description & Operation Manual
9. If a new message is logged before answer of the notification call, the message will
be available to the user and a new notification is not invoked. If a new message is
received after answering the notification call, the System will invoke another
notification call. The user will receive the notification after returning to idle.
10. When analog PSTN line is used, system will treat the call as the answered after
VM Notify Play Delay Over LCO Timer and play the new message prompt.
Password will be waited for VSF Group Dial Time Out time. If the user does not
enter the correct password during timer for DISA Retry Count times, then the call
will be disconnected.
Tel Number (PGM 236-Btn 6)
VSF/VMIM Notify (PGM 236-Btn 7)
Notify Retry (PGM 236-Btn 8)
Retry Interval (PGM 236-Btn 9)
VM MEX Notify over LCO (PGM160-Btn24-Btn13)
Notify Play Delay (PGM181-Btn18)
Related Features
Mobile Extension
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
VSF and/or VMIM
2.73.4 System Voice Memo
Description
This feature provides several general Voice Memos to provide the system time and date as
well as station number, and settings over the iPECS Phone speaker or the handset for SLTs.
Operation
iPECS Phone
To hear Date & Time Prompt
1. Dial feature code,
“661” for iPECS-50 & 100 “*661” for all
other systems
Announcement for date & time is heard, “Date is May 2nd. Time is xx:xx pm”.
To hear Station Number Prompt
1. Dial feature code,
To Next Page
Loading...