Ericsson iPECS-100 - Meet Me

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
272
Programming
STATION
1
Page Access (PGM 111-Btn 7)
2
Internal Page Zone Access (PGM 118)
SYSTEM
1
Page Warning Tone (PGM 161-Btn 4)
2
External Control Contacts (PGM 168)
Related Features
3
Paging Timeout Timer (PGM 181-Btn 9)
 Meet Me Page Answer
Hardware
 External Amplifier & Speakers
3.10.2 Meet Me Page Answer
Description
Any station may respond to a “Meet Me” Page request over an Internal or External Page Zone.
The user answers the page from any station and is connected to the paging party.
Flexible buttons of an iPECS Phone may be assigned as a {MEET ME} button.
Operation
iPECS Phone
To assign a Flex button as a {MEET ME} button
1. [PGM] + {FLEX} + “##” + [SAVE]
To answer a page with Meet Me Page
1. Lift the handset or press the [SPEAKER] button.
2. Dial “##”, the Meet Me Page code or press the {MEET-ME} button.
SLT
To answer a page with Meet Me Page
1. Lift the handset to receive intercom dial tone.
2. Dial “##”, the Meet Me Page code.
Conditions
1. A Meet Me Page must be answered within the Page Time-out timer.
2. A station may answer a Meet Me Page from any station regardless of pickup/paging
group assignments and page access permission.
3. The paging party must remain off-hook until the paged party answers the Meet Me
request. The initiator may press the Mute button to eliminate transmitting over the
page circuit while waiting for the party to answer.