Ericsson iPECS-100 - Silent Text Message

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
333
5.22 SILENT TEXT MESSAGE
Description
Silent Text Messaging is used to respond to an OHVO call without disconnecting the existing
call. Silent Text Messages are sent by pressing a pre-programmed message button or [DND]
button.
Operation
iPECS Phone
To program a {TEXT MESSAGE} button
1. [PGM] + {FLEX} + [PGM] + “51” + Display Message code (“00”-“20”) + [SAVE]
To respond to an Off-Hook Voice Over call with a Text message
1. Upon receiving announcement, press the desired {TEXT MESSAGE} or [DND]
button, text message is sent to the display of the calling party, OHVO call is
terminated.
Conditions
1. Silent Text Messaging employs the Custom Message/Pre-defined Display
Messages. But, Display Message code in {TEXT MESSAGE} button is 01 ~ 09, the
“STA IN DO NOT DISTURB” message is displayed.
2. When Silent Text Messaging is used to respond to an OHVO call, the existing call
will not be disconnected.
3. When a SLT places the OHVO call, the receiving station will receive the “NO
DISPLAY AVAILABLE” message and error tone to indicate Silent Text Messaging
is not available to the SLT.
Programming
STATION 1 Voice Over (PGM 113-Btn 6)
Related Features
 Call Waiting/Camp-On
 Group Listening
 Voice Over
 Pre-defined & Custom Text Display Messages
Hardware
 iPECS Phone