iPECS-LIK
Feature Description & Operation Manual
2.60
PRE-DEFINED & CUSTOM TEXT DISPLAY MESSAGES
Description
A user can select a text message to be displayed on the LCD of a calling iPECS Phone with
Display. When a user activates Text Display Messages, incoming intercom calls will signal the
user with Muted ring in-place of normal ring and the LCD of the calling station will display the
selected message. There are ten Pre-defined messages (01-10), ten system wide Custom
messages and one user defined Custom message. Several of the ten Pre-defined messages
allow for auxiliary information such as a time, date or number.
System level Custom Messages may be entered from the Attendant or Administrator’s phone
or via the Web Admin. The user’s Custom Message is assigned from the user’s phone as well
as the Attendant or the Administrator.
iPECS Phone users may assign a Flex button as a {DISPLAY MESSAGE} button or may
include the message code to act as a {ONE-TOUCH DISPLAY MESSAGE} button.
The Pre-defined messages are:
Message 01
LUNCH RETURN AT hh:mm
Message 02
ON VACATION
RETURN AT DATE mm:dd
Message 03
OUT OF OFFICE
RETURN AT TIME hh:mm
Message 04
OUT OF OFFICE
RETURN AT TIME hh:mm
Message 05
OUT OF OFFICE
RETURN UNKNOWN
Message 06
CALL (enter up to 17 digits)
To Next Page
Loading...