Ericsson iPECS-100 - Related Features;Disa Retry Counter (Pgm 160-Btn 5)

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
10
regions, particularly the US and UK, a System Authorization code may be required
for DISA access. Entering a Station code on a DISA line will fail in these areas. In
other regions, a System Authorization code can be used with Walking COS.
11. In case of System Authorization code, there is a system base admin option - End
code (#) usage in System Auth Code (PGM 160 – Btn 26).
If this value is set to ON, user must enter End Code (#) after entering authorization
code.
Programming
STATION
1
Station Account (PGM 112-Btn 19)
2
CO/IP 1 CO/IP Group Authorization (PGM 141-Btn
8)
3
DISA Authorization Code (PGM 142-Btn 5)
SYSTEM
1
DISA Retry Counter (PGM 160-Btn 5)
2
FAC Retry Count (PGM 160-Btn 16)
3
Old Auth Code Use (PGM 161-Btn 16)
4
COS 7 When Auth fails (PGM 161-Btn 17)
5
End code(#) usage in System Auth Code (PGM 160
– Btn 26)
TABLES
1
LCR Check Password (PGM 221-Btn 6)
2
Station Authorization Code Table (PGM 227)
Related Features
 Account Code
 Auto Service Mode Control
 Direct Inward System Access (DISA)
 CO/IP Line Groups
 CO/IP Access
 Temporary Station COS/Lock
 Walking COS
 Call Forward
 Station User Programming & Codes
Hardware