Ericsson iPECS-100 - 5.9 DND - ONE TIME DND

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
280
4.4 CO/IP LINE PRESET FORWARD
Description
Each CO/IP Line can be assigned a Ring-No-Answer Preset Forward destination. An incoming
call on the CO/IP line will be routed to the defined ring destination. At expiration of the CO/IP
Line Preset No Answer Forward timer, the call is forward to the defined Preset Forward
destination, which is an index to the ICLID Ring Assignment Table.
The destination can be a station or station group including an adjunct Voice Mail. When the call
is forwarded to an adjunct Voice Mail group, a predefined Voice Mail Id (VMID) will be sent to
the VM system to identify the Mailbox to receive the call.
Operation
System
Operation of this feature is automatic.
Conditions
1. CO/IP line Preset Forward is disabled for calls initially routed to a station group.
2. CO/IP line Preset Forward will override Call Forward No-Answer at a station.
3. CO/IP line Preset Forward is disabled if the Preset Forward Timer is set to 0.
4. The CO/IP line Preset Forward destination cannot be the VMIM/VSF group.
Programming
CO/IP
1
CO Preset Forward, Forward timer (PGM 147-Btn 1)
2
CO Preset Forward, Ring Table Index (PGM 147-Btn
2)
3
CO Preset Forward, VMID (PGM 147-Btn 3)
ISDN & ICLID
1
ICLID Ring Assignment Table (PGM 204)
Related Features
 Call Forward
 ICLID Call Routing
Hardware