iPECS-LIK
Feature Description & Operation Manual
2.17
CALL TRANSFER
2.17.1 Call Transfer, Station
Description
CO/IP calls can be transferred to other stations in the iPECS system. Calls can be transferred
announcing the call (screened) or without an announcement (unscreened).
When a call is transferred, the Transfer Recall Timer is initiated. If the timer expires before the
call is answered, the Hold Recall process is initiated.
Operation
iPECS Phone
While on a CO/IP call, Screened Call Transfer
1. Press [TRANS] button.
2. Dial the station to receive the transfer.
3. At answer or splash tone, announce the call.
4. Hang-up to complete the transfer.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. At answer or splash tone, announce the call.
3. Hang-up to complete the transfer.
While on a CO/IP call, Unscreened Call Transfer
1. Press [TRANS] button.
2. Dial the station to receive the transfer.
3. Hang-up to complete the transfer.
Or,
1. Press the {DSS/BLF} button for the desired station.
2. Hang-up to complete the transfer.
SLT
While on a CO/IP call, Screened Call Transfer
1. Momentarily depress the hook-switch.
2. Dial the station to receive the transfer.
3. At answer or splash tone, announce the call.
4. Hang-up to complete the transfer.
While on a CO/IP call, Unscreened Call Transfer
1. Momentarily depress the hook-switch.
2. Dial the station to receive the transfer.
3. Hang-up to complete the transfer.
To Next Page
Loading...