Ericsson iPECS-100 - 5.3 AUTO RELEASE OF [SPEAKER]

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
273
Programming
SYSTEM 1 Paging Timeout Timer (PGM 181-Btn 9)
Related Features
 Internal/External & All Call Page
Hardware
3.10.3 SOS Paging
Description
The system allows of being recorded multiple VMIM messages for pre-recorded paging.
Depending on circumstance, user can use pre-recorded messages for paging. Recorded VMIM
message is paged to a page zone at emergency.
Operation
To assign {VMIM SOS Paging} at a flexible button, perform the following Steps:
1. Press the [TRANS/PGM] button.
2. Press the FLEX button to assign.
3. Dial paging code (5xx).
4. Dial Message number (001-070).
5. Press the [HOLD/SAVE] button.
To activate VMIM SOS paging:
1. Press the assigned {VMIM SOS Paging} flexible button.
Condition
 This feature can be only activated by pressing assigned flexible button in idle state.
 The VMIM message for SOS Paging can be recorded only at attendant station.
 Paging zone includes internal, external and all call paging area.
 VMIM SOS paging is not restricted by VMIM Paging timer. The whole VMIM SOS
paging can be paged even though Paging Timeout timer expires.
Programming
STATION 2 Page Access (PGM 111-Btn 7)
Related Features
 VMIM/VSF, Paging
Hardware
 VSF and/or VMIM