Ericsson iPECS-100 - Sip Video Call

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
408
8.16 SIP VIDEO CALL
Description
Video Call feature is added.
Operation
To place Video call from SIP-88xx
1. Dial the counterpart Video phone number and press [VIDEO CALL] button. Or
press [VIDEO CALL] button and dial the counterpart Video phone number.
2. If the counter part can answer with Video, Video call will be established. If not, voice
call will be established.
To establish Video call after answering with voice call
1. Voice call will be established at first.
2. Start Video codec negotiation pressing [VIDEO START] button or soft menu.
3. Video call will be established if the video codec negotiation is succeeded.
Conditions
1. After pressing [CONF], [HOLD], [TRANS], Video call will be changed as Voice call.
2. For the Trunk outgoing call, cannot establish Video call directly – after establishing
Voice call, Video call must be established.
Programming
Related Features
Hardware
 None