Ericsson iPECS-100 - Ip Address Dialing

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
290
4.12 IP ADDRESS DIALING
Description
If allowed, users may place calls using an IP path. The system accepts user dialed digits as the
IP address for the called party. When dialing an IP call, the asterisk, “*”, is used as the “dot”
between bytes of the IP address.
Operation
iPECS Phone
To place an IP Call
1. Lift the handset or press the [SPEAKER] button.
2. Press {IP GRP} button or dial IP Group access code.
3. Dial ‘xxx * xxx * xxx * xxx’, use ‘*‘ as the dot in the IP address.
4. Press “#” to complete dialing.
SLT
To place an IP Call
1. Lift the handset.
2. Dial IP Group access code.
3. Dial ‘xxx “*” xxx “*” xxx “*” xxx‘, use “*” as the dot in the IP address.
4. Press “#” to complete dialing.
Conditions
Programming
STATION 1 CO/IP Group Access (PGM 117)
2 Direct IP Call (PGM 122-Btn 1)
Related Features
Hardware