Ericsson iPECS-100 - Automatic Pause Insertion

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
37
2.6 AUTOMATIC PAUSE INSERTION
Description
In addition to a manually entered Pause, the system will automatically pause dialing to allow for
potential connection delays. The pause will be inserted when any of the following occur:
 After a Flash is encountered in a Speed Dial number,
 After a PABX access code is encountered in a Speed Dial or redial number,
 After a Pulse to Tone Switchover is encountered in a Speed Dial or Redial
number.
 When a connect message is received on an ISDN Line.
Operation
System
The system automatically pauses dialing after an appropriate event.
Conditions
1. An automatically inserted pause is not counted as a digit in a Speed Dial number.
2. The LCD of the iPECS Phone will show a "P" when a pause is encountered. This
indication is not shown if the system inserts the Pause automatically.
Programming
SYSTEM 1 Pause Timer (PGM 181-Btn 10)
Related Features
 Station Speed Dial
 System Speed Dial
 Auto Called Number Redial (ACNR)
 LNR (Last Number Redial)
 Dial Pulse to Tone Switchover
Hardware