Ericsson iPECS-100 - Speed Dial; Display Security; Speed Dial Pause Insertion

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
149
2.64 SPEED DIAL
2.64.1 Display Security
Description
Station and System Speed Dial numbers may be programmed so that the digits are not
displayed on the LCD of iPECS phones.
Operation
To assign Display Security to a Speed Dial number
1. Dial “*” as the first digit of the Speed Dial number.
Conditions
1. The number is displayed when programming the Speed Dial number.
2. Display Security does not affect the SMDR output.
3. Display Security is provided on all CO/IP calls including calls that are transferred or
recall.
4. An “*” in any digit position other than the first, will activate Pulse to Tone Switchover.
Programming
Related Features
 Dial Pulse to Tone Switchover
 Speed Dial
Hardware
2.64.2 Speed Dial Pause Insertion
Description
A pause dialing command may be inserted in a Station or System Speed Dial number. When
encountered, the system will stop dialing the Speed Dial number for the assigned “pause”
duration. Multiple pauses ([HOLD] button depressions) may be inserted into a Speed Dial
number.
Operation
System
Pause operation is automatic when encountered; see Station or System Speed Dial for pause
entry