iPECS-LIK
Feature Description & Operation Manual
4.7
CO RING DETECT
Description
The system incorporates timers for Ring-on and Ring-off durations to assure proper alerting.
When the duration of the ring signal exceeds the Ring-on timer, alerting will start. When the ring
is not present for a period exceeding the Ring-off timer, alerting will stop. This allows the
system Ring cycle detection to be matched to the many and varied PBX systems.
Operation
System
Operation of Ring detect is automatic.
Conditions
1. Ring On and Ring Off are assigned on a system basis.
2. The CO Ring Detect is applied to analog CO Lines only.
Programming
SYSTEM 1 CO Ring OFF Timer (PGM 180-Btn 17)
2 CO Ring ON Timer (PGM 180-Btn 18)
Related Features
Hardware
To Next Page
Loading...