Ericsson iPECS-100 - Alarm Notification Control

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
250
Programming
1 Personal Group Assignment (PGM 260)
2 Personal Group Attributes (PGM 261)
Attribute Name
Description
Use Master Wake Up
If this value is set to ON, all member wake-up follow by master wake up.
If this value is set to OFF, individual wake-up is worked by each station.
Use Master Call Forward
If this value is set to ON, call forward setting affect to Master and all
member.
If this value is set to OFF, individual Call Forward is worked by each
room.
Use Master DND
If this value is set to ON, DND setting affect to Master and all member.
If this value is set to OFF, individual DND is worked by each room.
Linked Pair Usage
OFF (Incoming Call Only)
ON (All Call)
Related Features
 SMDR
 Call Coverage
 Wake Up
 Message Wait / VM Message
Hardware
2.88 ALARM NOTIFICATION CONTROL
Description
The system can be configured to notify Emergency Call, DCOB Fault or SIP Registration
Fault to the assigned iPECS Phone. The following table shows the parameters for alarm
notification control.
Menu
Attribute
Range
Default
Alarm Attributes
(PGM 163)
Emergency Call Notify
ON/OFF
ON
DCOB Fault Notify
ON/OFF
ON
SIP Registration Fault Notify
ON/OFF
ON
Zone Attribute
(PGM 439)
Emergency Call Notify Station
Station number
none
DCOB Fault Notify Station
Station number
none
SIP Registration Fault Notify Station
Station number
none