iPECS-LIK
Feature Description & Operation Manual
Programming
Related Features
Message Storage
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
• VSF and/or VMIM
2.73.3.8 Call Forward from VM
Description
External users can activate or deactivate Call Forward for their station. Pressing “7” while
retrieving messages will return the "Mailbox Set Forward" prompt.
Operation
To activate Call Forward while in the VM;
1. Press “7”, for Mailbox set forward, the “Mailbox Set Forward” prompt is received.
2. Dial “1” and receive the “Password Entry” prompt (“Please enter the number to
forward to ...").
3. Dial Station Number as follows:
To forward to another station, dial the station number.
To forward calls Off net, dial “*” and enter station speed number. If the
station Speed bin is valid, the confirmation announcement “forwarded to
station (‘xxx’)” or “forwarded to speed bin number (yyyy)” is played.
To deactivate Call Forward
1. Press “7”, for Mailbox set forward, the “Mail Box Set Forward” prompt is received.
2. Dial “2” and receive the “Station forwarding is canceled” prompt.
To return to the Main menu
1. Dial “9” and receive the “Mailbox Settings” prompt.
Conditions
1. If the user is external, the user must begin dialing within and dial subsequent digits
within the VSF Inter-Digit Timer. If not, the call is released.
2. This Mailbox Set Forward is only available for external users.
3. In Admin, VSF is used as the single reference for a parameter that applies to both
the VSF and the VMIM.
Programming
To Next Page
Loading...