Ericsson iPECS-100 - Delayed Auto Attendant; DISA Incoming Case (Russia Only); Ring Assigned Case

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
79
2.27 DELAYED AUTO ATTENDANT
2.27.1 Ring Assigned Case
Description
An incoming CO/IP call can be routed to the VMIM/VSF Auto Attendant either immediately
upon detection or after a delay of up to 30 seconds. This allows other stations assigned
immediate ring the opportunity to answer before the call is routed to the Auto Attendant.
Operation
System
Operation of this feature is automatic when assigned
Conditions
1. When Delayed Auto Attendant Ring is assigned, after the delay, the call will no
longer ring assigned stations and will only ring to the VMIM/VSF Auto Attendant.
2. If no delay is entered, the call will ring to the VMIM/VSF Auto Attendant immediately.
3. To assign Delayed Attendant ring, at least one station or Station Group must be
assigned immediate ring.
4. Ring is assigned to a VMIM/VSF Auto Attendant announcement (01-70) as a
“station type” with a delay from 00 to 30 seconds.
Programming
CO/IP 1 CO Station Ring Assignment (PGM 144)
Related Features
• CO/IP Ring Assignment
Hardware
2.27.2 DISA Incoming Case (Russia Only)
Description
In case of DISA incoming call, there are two Timers that is related with DISA Delay. These
timers can be set in PGM 142 – Co-line Base.
DISA Answer Timer : When DISA incoming call is routed to a system, after this time, system is
answered.
DISA Delay Timer : When system is answered, after this time, VSF system announcement start
to play.