iPECS-LIK
Feature Description & Operation Manual
5.23
SPEAKERPHONE
Description
iPECS Phones equipped with speakerphone circuitry enable the telephone to be used hands-
free in two-way conversations.
Operation
iPECS Phone
To activate the speakerphone
1. Press the [SPEAKER] button, [SPEAKER] LED lights steady.
To switch from Handset to Speakerphone
1. Press the [SPEAKER] button, [SPEAKER] LED lights steady.
2. Replace Handset, Speakerphone activated.
To terminate a speakerphone call
1. Press the [SPEAKER] button, [SPEAKER] LED extinguishes.
Conditions
1. If Automatic Speaker Select is enabled for the station, pressing a DSS,
CO/LOOP/POOL/IP or Speed Dial button will automatically activate the
speakerphone.
2. The [MUTE] button LED indicates the status of the Microphone, when lit the
Microphone is inactive.
3. When Group Listen is enabled, pressing the [SPEAKER] button while using the
handset will send audio to both the Handset and Speaker. However, only the
Handset microphone is active. In order to activate the Speakerphone Microphone,
the Handset must be placed on-hook.
4. Each iPECS Phone equipped with Speakerphone is allowed/denied Speakerphone
operation in the system database.
5. 5. When Headset operation is assigned for the station, the Speakerphone is
disabled and the [SPEAKER] button activates the Headset audio path instead of
the speaker.
Programming
STATION 1 Headset Ring (PGM 111-Btn 8)
2 Speakerphone (PGM 111-Btn 9)
Related Features
Mute
Group Listening
Automatic Speaker Select
Headset Compatibility
Hardware
iPECS Phone
To Next Page
Loading...