Ericsson iPECS-100 - 2.4 AUTO CALL RELEASE

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
11
2.4 AUTO CALL RELEASE
Description
CO/IP or intercom calls (except Hands-free Answerback), will be released automatically if the
user does not complete dialing or, for intercom calls, the called party does not answer after a
pre-determined time.
Operation
System
Auto Call Release of Intercom calls:
1. If a station places an intercom call and the called station does not answer in the
Intercom Call Release Time, the call is terminated and the calling user receives
error tone.
Auto Call Release of CO/IP calls:
1. If a station seizes an idle CO/IP Line and does not dial within the CO/IP Call
Automatic Release Time, the call is terminated and the user will receive error tone.
Conditions
1. If the Automatic Call Release Timer is set to “0”, Auto Call Release is disabled.
2. When the handset is used to place a call, the user will receive error tone for 30
seconds followed by 30 seconds of Howler tone and the station is placed in a fault
mode. If on-hook dialing is used, the station receives error tone for one (1) second
and returns to idle automatically.
Programming
STATION
1
Howling Tone to Stn (PGM 111-Btn 5)
SYSTEM
1
CO Call Automatic Release Timer (PGM 180-Btn 12)
2
Intercom Call Automatic Release Timer (PGM 182-
Btn 4)
Related Features
 Howler Tone
Hardware