Ericsson iPECS-100 - 2.77 REMOTE DEVICE ZONE MANAGEMENT

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
203
Operation
iPECS Phone
To assign a {VMAILBOX} Flex button;
1. [PGM] + {FLEX} + VM group + Mail-box (station) number + [SAVE]
To retrieve Voice Mail locally
1. Lift the handset or press the [SPEAKER] button.
2. Press [MSG/CALLBK] button. The message contents summary is shown as below.
ST CL VS VM FS MS
001 001 005 006 001 004
3. Dial digit “3” to select VMIM/VSF Messages.
4. Press the [MSG/CALLBK] to receive the “Mail Box & Password” prompts
sequentially.
5. Dial the Mail Box and corresponding password to receive the “Number of
Messages” prompt.
6. Dial desired option code.
7. At completion of session, hang-up to return to idle.
Or,
1. Lift the handset or press the [SPEAKER] button.
2. Press {VMAILBOX} button.
3. Dial the Mailbox password to receive the “Number of Messages” prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial “7”.
2. At the beep, record the memo.
3. Dial “*” to stop recording and store the memo.
4. During or after the New/Old option prompt, dial 4 to forward the message and
memo.
SLT
To retrieve Voice Mail locally
1. Lift the handset.
2. Dial the Voice Mail Group to receive the “Mailbox & Password” prompts sequentially.
3. Dial the Mailbox and corresponding password to receive the “Number of Messages”
prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
To attach a memo to the current voice message;
1. During or after the New or Old Message option prompt, dial “7”.
2. At the beep, record the memo.
3. Dial * to stop and store the memo.
4. During or after the New Old option prompt, dial “4” to forward the message and
memo.