Ericsson iPECS-100 - 2.55 MULTIPLE LANGUAGE SUPPORT

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
114
To access a call on Exclusive Hold from the holding station
1. Lift the handset or press the [SPEAKER] button.
2. Press the held CO/IP line.
Or,
1. Dial “8#”, the Held CO/IP Call Access code.
2. Dial the CO/IP line number.
SLT
To place a call on Exclusive Hold
1. Momentarily press the hook-switch.
To access a call on Exclusive Hold from the holding SLT
1. Lift the handset.
2. Dial “8#”, the Held CO/IP Call Access code.
3. Dial the CO/IP line number.
Conditions
1. When a CO/IP line is placed on Exclusive Hold, the button LED will flash at 120 ipm
at the holding station and will be On at all other stations.
2. All Transferred CO/IP calls are placed on Exclusive Hold for the receiving station.
3. The LED of {LOOP} and {POOL} buttons will display the CO/IP line status.
Programming
SYSTEM
1
Hold Preference (PGM 160-Btn 7)
2
Attendant Recall Timer (PGM 180-Btn 1)
3
Exclusive Hold Recall Timer (PGM 180-Btn 4)
4
I-Hold Recall Timer (PGM 180-Btn 5)
Related Features
5
Transfer Hold Recall Timer (PGM 180-Btn 7)
 Call Transfer, CO/IP
 Hold Preference
 Hold Recall
 System Hold
Hardware