Ericsson iPECS-100 - 2.80 CO CALL REROUTING

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
208
Conditions
1. The voice message is stored in the VMIM/VSF as well as being attached to the e-
mail. The voice message must be expressly deleted from the VMIM/VSF even if
the e-mail is deleted.
2. The e-mail is sent to the address assigned for the station with the “sender” address
defined for the VMIM/VSF. Note the latter is required, as many e-mail servers will
reject anonymous e-mails.
3. The e-mail address for the VMIM/VSF and the station is defined under the Web
Admin.
4. In Admin, VSF is used as the single reference for a parameter that applies to both
the VSF and the VMIM.
5. The Voice message can be attached to the e-mail notification as a .wav file, if the
Attach Message option (PGM 111) is enabled. If disabled, the notification e-mail
does not include an attached wav file.
6. If the below E-mail program is duplicated with each other, Station program have
priority.
Programming
STATION
1
VSF MSG – SMTP Mail Server Address
2
VSF MSG – Receiver Mail Address
3
VSF MSG – SMTP Mail Server ID
4
VSF MSG – SMTP Mail Server P/W
5
VSF MSG – Add Message
6
VSF MSG – Delete Message After Add
7
VSF MSG – SMTP Security
8
VSF MSG – SMTP Port
9
VSF MSG – Sender Mail Address
BOARD
1
UMS Sender Mail Address (PGM 132-Btn 6)
SYSTEM
1
VSF/VMIM SMTP Port
Related Features
 VMIM/VSF Integrated Auto Attd/Voice Mail
Hardware
 VSF and/or VMIM