Ericsson iPECS-100 - Page 344

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
306
The 50th CLIP index will be used generally to all CLI cases(from Station CLI 1 to Station CLI 5).
The 50th CLIP index name will be changed to [Station CLI].
Operation
Example - Station 110 has 5 CLI and related program is as followings.
1. CLI Station Number (Original CLI) - 110.
2. Station CLI 2 – 01234567.
3. Station CLI 3 – 01234567890123456.
4. Station CLI 4 – 110.
5. Station CLI 5 – 1234567890.
6. COLP Table index 01 – 450.
7. Area Code – 031.
8. In PGM 143, CO 1 is set to CLI 1, CO 2 is set to CLI 2 …. CO 5 is set to CLI 5.
Station 110 Call to outside via CO 1, CLIP table is 01.
1. CLI is 031 450 110.
Station 110 Call to outside via CO 2, CLIP table is 01.
1. CLI is 031 450 01234567.
Station 110 Call to outside via CO 2, CLIP table is 50(Station CLI).
1. CLI is 01234567.
Station 110 Call to outside via CO 3, CLIP table is 50(Station CLI).
1. CLI is 01234567890123456.
Net Slave station 110 seizes the transit out co-line 2. CLIP table is 01. PSTN CLI Method is
set to ON.
1. CLI is 031 450 01234567.
Net Slave station 110 seizes the transit out co-line 2. CLIP table is 50. PSTN CLI Method is
set to ON.
1. CLI is 01234567.
Conditions
1. New CLI Station Number length is Max 16.
2. When program new CLI in PGM 114, Character can be entered in each PGM for
future requirement. But, now it is recommended to enter only Numerals.
3. Default value for PGM 143 – Station CLI Type is CLI Index 1(Normal CLI).
Programming
STATION
1
PGM 114 – Station CLI 2 – Station CLI 5
CO/IP
1
PGM 143 – Choice CLI Type.(CLI 1 – CLI5)
Related Features
2
PGM 143 – COLP/CLIP Table.
Hardware