Ericsson iPECS-100 - 7. SLT; 7.1 BROKER CALL

iPECS-LIK
Feature Description & Operation Manual
Issue 6.1
336
Conditions
1. The {LOOP} and {POOL} buttons provide a status indication for the call as long as
the station has supervisory control.
2. If there is no available {CO}/{IP} {LOOP} or {POOL} button for a call, the station will
not ring for an incoming CO/IP call; transfers to the station immediately recall the
initiator and recalls are routed directly to the Attendant.
3. A station may have multiple {LOOP} and {POOL} buttons.
4. When all CO Lines in a group are busy, any {POOL} buttons associate with the
group will show busy, otherwise, {POOL} buttons will only display the status of an
activate call.
5. {POOL} buttons will access a CO Line from the designated group using the Round
Robin or Last Used method as assigned in the database.
6. The priority for the appearance of a CO call transfer is first a direct CO Line
appearance ({CO}/{IP} button), if not available a {LOOP} appearance is employed, if
not available a {POOL} appearance is used. If there is no appearance available, the
transferring station recalls immediately.
7. Station User Program Codes are defined in section 5.24.
Programming
NUMBERING 1 Flexible Numbering Plan (PGM 105~109)
STATION 1 Flexible Button Assignment (PGM 115)
Related Features
 Flexible Numbering Plan
 Station User Programming & Codes
Hardware
 iPECS Phone