Tools: tool-less
Preliminary steps
▶
If applicable, "Removing the front cover with lock" on page
49.
▶
Locate the correct drive bay, see "Overview of configurations" on page 146.
Removing a 3.5-inch HDD dummy module
Unusable HDD bays contain a HDD dummy with dummy lock to prevent
customer from erroneously adding a HDD.
Figure 62: Removing the dummy lock
▶
Pull the dummy lock out of the dummy cover
. Please be aware that the
dummy lock can be damaged.
Hard disk drive (HDD) / solid state disk (SSD)
RX2540 M7 Upgrade and Maintenance Manual 151
To Next Page
Loading...
