Figure 78: Removing the dummy lock
▶
Pull the dummy lock out of the dummy cover
. Please be aware that the
dummy lock can be damaged.
Figure 79: Removing a 2.5-inch HDD/SSD dummy module
▶
Press both tabs together (1) and pull the dummy module out of its bay
(2).
CAUTION
▶
Keep the dummy module for future use.
▶
Always replace dummy modules into unused HDD/SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
Hard disk drive (HDD) / solid state disk (SSD)
178 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
