▶
If applicable, move the M.2 SSD latch to a fitting position:
▶
T
urn the M.2 SSD latch for 90 degrees (1).
▶
Remove the M.2 SSD latch (2).
▶
Install the M.2 SSD latch in the right position depending on the length of
the M.2 SSD (3).
▶
Turn the M.2 SSD latch for 90 degrees (4).
Hard disk drive (HDD) / solid state disk (SSD)
RX2540 M7 Upgrade and Maintenance Manual 213
To Next Page
Loading...
