Concluding steps
▶
If applicable, "Installing the SAS expander board holder" on page
205.
▶
If applicable, install the riser module 2, see "Installing a riser module" on
page 74.
▶
"Installing the fan cage" on page 77.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
Verify whether the iRMC recognizes the installed M.2 SSD.
▶
If applicable, "Installing the front cover with lock" on page 71.
Hard disk drive (HDD) / solid state disk (SSD)
226 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
