▶
Pull out the RAID controller from the riser card slot.
Install the Internal RAID controller in a slight angle into the riser card
slot. Otherwise, a capacitor under the Internal RAID controller could
interfere with the Internal RAID riser module and fall off (see circles).
Removing the internal RAID riser module
Figure 175: Removing the internal RAID riser module
▶
If necessary
, disconnect all cables from the internal RAID riser module.
▶
Loosen the knurled screw (see circle).
Expansion cards and backup units
RX2540 M7 Upgrade and Maintenance Manual 305
To Next Page
Loading...
