▶
If applicable, "Configuring LAN teaming" on page
115.
▶
"Suspending BitLocker functionality" on page 89.
▶
"Checking boot priority" on page 93.
▶
"Shutting down the server" on page 50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Locating the defective component" on page 48.
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 72.
Removing the defective expansion card
▶
Remove the expansion card, see "Removing an expansion card" on
page 278.
▶
If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see "Removing slot brackets" on page 252.
Installing the new expansion card
▶
If applicable, install the slot bracket, see "Installing slot brackets" on
page 249.
▶
Install the expansion card, see "Installing an expansion card" on page 269.
Concluding steps
▶
Install the corresponding riser module, see "Installing a riser module" on
page 74.
▶
"Reassembling" on page 59.
▶
If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
▶
"Enabling replaced components in the BIOS" on page 102.
Expansion cards and backup units
316 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
