CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Locating the defective server" on page
47.
▶
"Suspending BitLocker functionality" on page 89.
▶
If applicable, "Removing the front cover with lock" on page 49.
▶
"Shutting down the server" on page 50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the air duct" on page 80.
▶
"Locating the defective component" on page 48.
Removing the defective memory module
▶
Remove the memory module, see "Removing memory modules" on
page 344.
Installing the new memory module
▶
Install the memory module, see "Installing memory modules" on page 341.
Concluding steps
▶
"Installing the air duct" on page 79.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
Verify whether the iRMC recognizes the installed memory modules.
Main memory
346 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
