▶
Press in the latches and remove the CPU socket cover
.
▶
Save the CPU socket cover for future use.
Installing the CPU
CAUTION
When replacing a system board
▶
Use a magnifying glass (recommended) to inspect the socket
spring contacts for damages from dif
ferent angles. Do not use the
spare system board if any irregularities are visible. Possible
damages:
–
Contact spring is bent backwards upon itself
–
Contact spring tip position is shifted or out of alignment
▶
Never try to fix bent contact springs. Doing so may result in loss of
electrical performance and reliability
.
Figure 214: CPU in packaging
▶
Leave the CPU in its original packaging.
Processor (CPU)
354 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
