Figure 225: Removing the heat sink
▶
Loosen the captive screws in the sequence printed on the heat sink (1 to 4)
by proceeding as follows:
T
orque: 0.9 Nm - 1.0 Nm
▶
First, loosen the captive screws 4 and 3 completely.
▶
Loosen the captive screws 2 and 1 completely.
▶
Push the four latches inward.
Processor (CPU)
368 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
