▶
"Shutting down the server" on page
50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the fan cage" on page 76.
Removing the ODD dummy cover
Figure 247: Removing the dummy cover
▶
Pull the dummy cover out of the bay
.
CAUTION
▶
Keep the dummy cover for future use.
▶
If you remove the accessible drive again and do not replace it with
a new one, the dummy cover must be reinstalled to comply with
EMC regulations and to satisfy cooling requirements and fire
protection measures.
Accessible drives
392 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
