▶
Remove the two screws (see circles).
▶
Remove the ODD latch.
▶
If no new ODD will be installed:
▶
Fasten the ODD latch with two screws to the chassis (see Figure 246).
Installing the ODD dummy cover
Figure 271: Installing the dummy cover
▶
Insert the dummy cover and push it inward until it engages at the other side.
Concluding steps
▶
"Installing the fan cage" on page
77.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
▶
"Resuming BitLocker functionality" on page 107.
Accessible drives
418 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
