Tools: Phillips PH2 / (+) No. 2 screwdriver
Preliminary steps
▶
"Locating the defective server" on page
47.
▶
"Removing backup and optical disk media" on page 92.
▶
"Suspending BitLocker functionality" on page 89.
▶
If applicable, "Removing the front cover with lock" on page 49.
▶
"Shutting down the server" on page 50.
▶
"Disconnecting the power cord" on page 50.
▶
"Getting access to the component" on page 55.
▶
"Removing the fan cage" on page 76.
Removing the defective RDX drive
▶
Remove the RDX drive, see "Removing the RDX drive" on page 445.
Installing the new RDX drive
▶
Install the RDX drive, see "Installing the RDX drive" on page 437.
Concluding steps
▶
"Installing the fan cage" on page 77.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
▶
"Resuming BitLocker functionality" on page 107.
Accessible drives
454 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
