Figure 310: Fasten the thermal sensor
▶
Fasten the thermal sensor with two screws (see circles).
Concluding steps
▶
Install all HDD modules, see "Installing a 2.5-inch HDD/SSD module" on
page 179 or "Installing a 3.5-inch HDD module" on page
152.
▶
"Installing the air duct" on page 79.
▶
"Installing the fan cage" on page 77.
▶
If applicable, "Installing the riser module 2" on page 75.
▶
"Reassembling" on page 59.
▶
"Connecting the power cord" on page 65.
▶
"Switching on the server" on page 71.
▶
If applicable, "Installing the front cover with lock" on page 71.
Thermal sensor
462 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
